Heat
Properties
| AdjustVarType |
If an Adjust object is attached to this object, returns a variable describing how this object is used by it (manipulated, controlled or reference).
(Inherited from BaseClass) |
| Annotation | (Inherited from BaseClass) |
| Area | Gets or sets the heat-transfer area (m�), nullable. |
| Area1 | Gets or sets the heat-transfer area (m�) used by the IHeatExchanger interface. |
| AttachedAdjustId |
If an Adjust object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedInfoCarrierId | (Inherited from BaseClass) |
| AttachedSpecId |
If an Specification object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedUtilities | (Inherited from BaseClass) |
| Bottom | (Inherited from BaseClass) |
| Calculated | (Inherited from BaseClass) |
| CalculatedMITA | Gets or sets the calculated minimum internal temperature approach (K) from the last simulation run. |
| CalculateHeatExchangeProfile | Gets or sets whether a detailed heat-exchange profile should be calculated along the exchanger length. |
| CalculationMode | Gets or sets the heat-exchanger calculation mode (e.g. CalcBothTemp, CalcArea). |
| CanUsePreviousResults | (Inherited from BaseClass) |
| ColdSideOutletTemperature | Gets or sets the calculated cold-side outlet temperature (K). |
| ColdSidePressureDrop | Gets or sets the pressure drop on the cold side (Pa). |
| ColdSideTemperatureChange | Gets or sets the temperature change on the cold side (K). |
| ComponentDescription |
Gets or sets the CAPE-OPEN component description for this unit operation.
(Inherited from UnitOpBaseClass) |
| ComponentName |
Gets or sets the CAPE-OPEN component name for this unit operation.
(Inherited from UnitOpBaseClass) |
| CorrectionFactorLMTD | Gets or sets the LMTD correction factor applied to the log-mean temperature difference. |
| CreateChartAction | (Inherited from BaseClass) |
| DebugMode | (Inherited from BaseClass) |
| DebugText | (Inherited from BaseClass) |
| DefinedTemperature | Gets or sets which fluid side has its outlet temperature explicitly specified by the user. |
| DeltaP | Gets or sets the overall pressure drop across the exchanger (Pa), nullable. |
| DetailedDebugReport | (Inherited from BaseClass) |
| Dimensions |
Gets or sets the list of physical dimensions (e.g. vessel diameter, length) associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| DynamicsOnly | (Inherited from BaseClass) |
| DynamicsSpec | (Inherited from BaseClass) |
| Efficiency | Gets or sets the thermal efficiency (interface proxy for ThermalEfficiency). |
| EnergyFlow |
Energy Flow property. Only implemented for Energy Streams.
(Inherited from BaseClass) |
| EquipmentTypes | Gets the list of equipment sub-types available for this heat exchanger. (Overrides UnitOpBaseClassEquipmentTypes) |
| ErrorMessage |
Gets or sets the error message regarding the last calculation attempt.
(Inherited from BaseClass) |
| ExternalSolverConfigData |
Gets or sets serialized configuration data for the external solver associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| ExternalSolverID |
Gets or sets the unique identifier of an external solver to be used for this unit operation.
(Inherited from UnitOpBaseClass) |
| ExtraProperties | (Inherited from BaseClass) |
| ExtraPropertiesDescriptions | (Inherited from BaseClass) |
| ExtraPropertiesTypes | (Inherited from BaseClass) |
| ExtraPropertiesUnitTypes | (Inherited from BaseClass) |
| FlowDir | Gets or sets the relative flow direction of the two fluid streams (counter-current or co-current). |
| FlowSheet |
Gets the current flowsheet where this object is located.
(Inherited from BaseClass) |
| GHGEmissionData | (Inherited from BaseClass) |
| GraphicObject |
Gets or sets the graphic object representation of this object in the flowsheet.
(Inherited from BaseClass) |
| HasPropertiesForDynamicMode | Gets a value indicating whether this unit operation exposes dedicated properties for dynamic mode. (Overrides BaseClassHasPropertiesForDynamicMode) |
| HeatDuty | Gets or sets the heat duty (kW) exchanged between the two streams. Proxy for the internal Q property. |
| HeatLoss | Gets or sets the fractional heat loss to the environment (kW). |
| HeatProfile | Gets or sets the heat duty profile along the exchanger length (kW at each discretisation point). |
| Height | (Inherited from BaseClass) |
| HotSideOutletTemperature | Gets or sets the calculated hot-side outlet temperature (K). |
| HotSidePressureDrop | Gets or sets the pressure drop on the hot side (Pa). |
| HotSideTemperatureChange | Gets or sets the temperature change on the hot side (K). |
| IgnoreLMTDError | Gets or sets whether negative LMTD (temperature cross) errors are suppressed instead of throwing. |
| InfoCarrierVarType | (Inherited from BaseClass) |
| IsAdjustAttached |
Checks if an Adjust operation is attached to this object.
(Inherited from BaseClass) |
| IsDirty | (Inherited from BaseClass) |
| IsFunctional | (Inherited from BaseClass) |
| IsInfoCarrierAttached | (Inherited from BaseClass) |
| IsSink | (Inherited from BaseClass) |
| IsSource | (Inherited from BaseClass) |
| IsSpecAttached |
Checks if an Specification operation is attached to this object.
(Inherited from BaseClass) |
| LastSolutionInputSnapshot | (Inherited from BaseClass) |
| LastUpdated | (Inherited from BaseClass) |
| Left | (Inherited from BaseClass) |
| LMTD | Gets or sets the calculated log-mean temperature difference (K). |
| LMTD_F | Gets or sets the calculated LMTD correction factor (F) for multi-pass exchangers. |
| MaxHeatExchange | Gets or sets the maximum thermodynamically possible heat exchange (kW) between the two streams. |
| MITA | Gets or sets the specified minimum internal temperature approach (MITA / pinch) in K. |
| MobileCompatible | Gets a value indicating whether this unit operation is compatible with mobile interfaces. (Overrides BaseClassMobileCompatible) |
| Name |
Object's Unique ID (Name)
(Inherited from BaseClass) |
| ObjectClass | Gets or sets the simulation object class category (Exchangers). (Overrides BaseClassObjectClass) |
| OutletVaporFraction1 | Gets or sets the target vapour fraction for the hot-side outlet when using OutletVaporFraction1. |
| OutletVaporFraction2 | Gets or sets the target vapour fraction for the cold-side outlet when using OutletVaporFraction2. |
| OverallCoefficient | Gets or sets the overall heat-transfer coefficient (W/(m��K)). |
| OverrideCalculationRoutine | (Inherited from BaseClass) |
| ParticleSizeDistributions |
Gets or sets the dictionary of particle size distribution data, keyed by compound or stream name.
(Inherited from UnitOpBaseClass) |
| Phases |
Phase collection, only implemented for Material Streams.
(Inherited from BaseClass) |
| PinchPointAtOutlets | Gets or sets whether the pinch-point specification applies at the exchanger outlets rather than internally. |
| PreferredFlashAlgorithmTag | (Inherited from BaseClass) |
| ProductAssembly | (Inherited from BaseClass) |
| ProductAuthor | (Inherited from BaseClass) |
| ProductContactInfo | (Inherited from BaseClass) |
| ProductDescription | (Inherited from BaseClass) |
| ProductName | (Inherited from BaseClass) |
| ProductPage | (Inherited from BaseClass) |
| ProductVersion | (Inherited from BaseClass) |
| PropertyPackage |
Gets or sets the property package associated with this object.
(Inherited from UnitOpBaseClass) |
| Q | Gets or sets the heat duty (W), nullable. |
| Right | (Inherited from BaseClass) |
| SelectedEquipmentType |
Gets or sets the name of the equipment type currently selected for this unit operation.
(Inherited from UnitOpBaseClass) |
| SpecVarType |
If an Specification object is attached to this object, returns a variable describing how this object is used by it (target or source).
(Inherited from BaseClass) |
| StoreDetailedDebugReport | (Inherited from BaseClass) |
| STProperties | Gets or sets the shell-and-tube heat exchanger geometry and physical properties used when ShellandTube_Rating is selected. |
| SupportsDynamicMode | Gets a value indicating whether this unit operation supports dynamic simulation mode. (Overrides BaseClassSupportsDynamicMode) |
| SupportsParticleSizeDistributions |
Gets a value indicating whether this unit operation supports particle size distribution calculations.
(Inherited from UnitOpBaseClass) |
| SupportsRestoreStateAfterError |
Gets a value indicating whether this unit operation supports restoring its state after a solver error.
(Inherited from UnitOpBaseClass) |
| TemperatureProfileCold | Gets or sets the cold-side temperature profile along the exchanger length (K). |
| TemperatureProfileHot | Gets or sets the hot-side temperature profile along the exchanger length (K). |
| ThermalEfficiency | Gets or sets the thermal efficiency (0�1) when using ThermalEfficiency mode. |
| Top | (Inherited from BaseClass) |
| UserDefinedChartNames | (Inherited from BaseClass) |
| UseShellAndTubeGeometryInformation | Gets or sets whether shell-and-tube geometry information is used for heat-transfer coefficient estimation. |
| Visible | (Inherited from BaseClass) |
| Width | (Inherited from BaseClass) |