Tank Properties
Properties
| AdjustVarType |
If an Adjust object is attached to this object, returns a variable describing how this object is used by it (manipulated, controlled or reference).
(Inherited from BaseClass) |
| Annotation | (Inherited from BaseClass) |
| AttachedAdjustId |
If an Adjust object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedInfoCarrierId | (Inherited from BaseClass) |
| AttachedSpecId |
If an Specification object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedUtilities | (Inherited from BaseClass) |
| Bottom | (Inherited from BaseClass) |
| Calculated | (Inherited from BaseClass) |
| CanUsePreviousResults | (Inherited from BaseClass) |
| ComponentDescription |
Gets or sets the CAPE-OPEN component description for this unit operation.
(Inherited from UnitOpBaseClass) |
| ComponentName |
Gets or sets the CAPE-OPEN component name for this unit operation.
(Inherited from UnitOpBaseClass) |
| CreateChartAction | (Inherited from BaseClass) |
| DebugMode | (Inherited from BaseClass) |
| DebugText | (Inherited from BaseClass) |
| DeltaP | Gets or sets the pressure drop across the tank (Pa). |
| DeltaQ | Gets or sets the calculated heat duty exchanged by the tank (kW). |
| DetailedDebugReport | (Inherited from BaseClass) |
| Dimensions |
Gets or sets the list of physical dimensions (e.g. vessel diameter, length) associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| DynamicsOnly | (Inherited from BaseClass) |
| DynamicsSpec | (Inherited from BaseClass) |
| EnergyFlow |
Energy Flow property. Only implemented for Energy Streams.
(Inherited from BaseClass) |
| EquipmentTypes | Gets the list of equipment orientation types supported by the tank (vertical, horizontal). (Overrides UnitOpBaseClassEquipmentTypes) |
| ErrorMessage |
Gets or sets the error message regarding the last calculation attempt.
(Inherited from BaseClass) |
| ExternalSolverConfigData |
Gets or sets serialized configuration data for the external solver associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| ExternalSolverID |
Gets or sets the unique identifier of an external solver to be used for this unit operation.
(Inherited from UnitOpBaseClass) |
| ExtraProperties | (Inherited from BaseClass) |
| ExtraPropertiesDescriptions | (Inherited from BaseClass) |
| ExtraPropertiesTypes | (Inherited from BaseClass) |
| ExtraPropertiesUnitTypes | (Inherited from BaseClass) |
| FlowSheet |
Gets the current flowsheet where this object is located.
(Inherited from BaseClass) |
| GHGEmissionData | (Inherited from BaseClass) |
| GraphicObject |
Gets or sets the graphic object representation of this object in the flowsheet.
(Inherited from BaseClass) |
| HasPropertiesForDynamicMode | Gets a value indicating that this unit operation exposes properties for dynamic mode configuration. (Overrides BaseClassHasPropertiesForDynamicMode) |
| Height | (Inherited from BaseClass) |
| IgnorePhase | Gets or sets a value indicating whether the presence of a vapour phase in the inlet stream should be ignored during steady-state calculation. When False, a vapour phase will raise an error. |
| InfoCarrierVarType | (Inherited from BaseClass) |
| IsAdjustAttached |
Checks if an Adjust operation is attached to this object.
(Inherited from BaseClass) |
| IsDirty | (Inherited from BaseClass) |
| IsFunctional | (Inherited from BaseClass) |
| IsInfoCarrierAttached | (Inherited from BaseClass) |
| IsSink | (Inherited from BaseClass) |
| IsSource | (Inherited from BaseClass) |
| IsSpecAttached |
Checks if an Specification operation is attached to this object.
(Inherited from BaseClass) |
| LastSolutionInputSnapshot | (Inherited from BaseClass) |
| LastUpdated | (Inherited from BaseClass) |
| Left | (Inherited from BaseClass) |
| MobileCompatible | Gets a value indicating whether this unit operation is compatible with mobile interfaces. (Overrides BaseClassMobileCompatible) |
| Name |
Object's Unique ID (Name)
(Inherited from BaseClass) |
| ObjectClass | Gets or sets the simulation object class, categorized as a Separator. (Overrides BaseClassObjectClass) |
| OverrideCalculationRoutine | (Inherited from BaseClass) |
| ParticleSizeDistributions |
Gets or sets the dictionary of particle size distribution data, keyed by compound or stream name.
(Inherited from UnitOpBaseClass) |
| Phases |
Phase collection, only implemented for Material Streams.
(Inherited from BaseClass) |
| PreferredFlashAlgorithmTag | (Inherited from BaseClass) |
| ProductAssembly | (Inherited from BaseClass) |
| ProductAuthor | (Inherited from BaseClass) |
| ProductContactInfo | (Inherited from BaseClass) |
| ProductDescription | (Inherited from BaseClass) |
| ProductName | (Inherited from BaseClass) |
| ProductPage | (Inherited from BaseClass) |
| ProductVersion | (Inherited from BaseClass) |
| PropertyPackage |
Gets or sets the property package associated with this object.
(Inherited from UnitOpBaseClass) |
| ResidenceTime | Gets or sets the calculated liquid residence time (s) based on volume and throughput. |
| Right | (Inherited from BaseClass) |
| SelectedEquipmentType |
Gets or sets the name of the equipment type currently selected for this unit operation.
(Inherited from UnitOpBaseClass) |
| SpecVarType |
If an Specification object is attached to this object, returns a variable describing how this object is used by it (target or source).
(Inherited from BaseClass) |
| StoreDetailedDebugReport | (Inherited from BaseClass) |
| SupportsDynamicMode | Gets a value indicating that this unit operation supports dynamic (time-stepping) mode. (Overrides BaseClassSupportsDynamicMode) |
| SupportsParticleSizeDistributions |
Gets a value indicating whether this unit operation supports particle size distribution calculations.
(Inherited from UnitOpBaseClass) |
| SupportsRestoreStateAfterError |
Gets a value indicating whether this unit operation supports restoring its state after a solver error.
(Inherited from UnitOpBaseClass) |
| Top | (Inherited from BaseClass) |
| UserDefinedChartNames | (Inherited from BaseClass) |
| Visible | (Inherited from BaseClass) |
| Volume | Gets or sets the tank total volume (m³). |
| Width | (Inherited from BaseClass) |