Cooler Class
Represents a cooler unit operation that reduces the temperature of an inlet material stream
by removing a specified amount of heat, targeting an outlet temperature, outlet vapor fraction,
or temperature change. Supports steady-state and dynamic simulation modes.
Definition
Namespace: DWSIM.UnitOperations.UnitOperations
Assembly: DWSIM.UnitOperations (in DWSIM.UnitOperations.dll) Version: 10.0.0.0
Assembly: DWSIM.UnitOperations (in DWSIM.UnitOperations.dll) Version: 10.0.0.0
C#
[SerializableAttribute]
public class Cooler : UnitOpBaseClassVB
<SerializableAttribute>
Public Class Cooler
Inherits UnitOpBaseClass- Inheritance
- Object BaseClass UnitOpBaseClass Cooler
Constructors
| Cooler | Initializes a new default instance of the Cooler class. |
| Cooler(String, String) | Initializes a new instance of the Cooler class with a name and description. |
Properties
| AdjustVarType |
If an Adjust object is attached to this object, returns a variable describing how this object is used by it (manipulated, controlled or reference).
(Inherited from BaseClass) |
| Annotation | (Inherited from BaseClass) |
| AttachedAdjustId |
If an Adjust object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedInfoCarrierId | (Inherited from BaseClass) |
| AttachedSpecId |
If an Specification object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedUtilities | (Inherited from BaseClass) |
| Bottom | (Inherited from BaseClass) |
| CalcMode | Gets or sets the active calculation mode that determines which variables are specified and which are calculated. |
| Calculated | (Inherited from BaseClass) |
| CanUsePreviousResults | (Inherited from BaseClass) |
| ComponentDescription |
Gets or sets the CAPE-OPEN component description for this unit operation.
(Inherited from UnitOpBaseClass) |
| ComponentName |
Gets or sets the CAPE-OPEN component name for this unit operation.
(Inherited from UnitOpBaseClass) |
| CreateChartAction | (Inherited from BaseClass) |
| DebugMode | (Inherited from BaseClass) |
| DebugText | (Inherited from BaseClass) |
| DeltaP | Gets or sets the pressure drop across the cooler (Pa). Outlet pressure = inlet pressure - DeltaP. |
| DeltaQ | Gets or sets the heat duty removed from the stream (kW). Positive = cooling. |
| DeltaT | Gets or sets the calculated or specified temperature change across the cooler (K). |
| DetailedDebugReport | (Inherited from BaseClass) |
| Dimensions |
Gets or sets the list of physical dimensions (e.g. vessel diameter, length) associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| DynamicsOnly | (Inherited from BaseClass) |
| DynamicsSpec | (Inherited from BaseClass) |
| Efficiency | Gets or sets the efficiency (%) as a plain Double proxy for Eficiencia. |
| Eficiencia | Gets or sets the cooler efficiency as a percentage (0–100). |
| EnergyFlow |
Energy Flow property. Only implemented for Energy Streams.
(Inherited from BaseClass) |
| EquipmentTypes | Gets the list of equipment sub-types available for this cooler. (Overrides UnitOpBaseClassEquipmentTypes) |
| ErrorMessage |
Gets or sets the error message regarding the last calculation attempt.
(Inherited from BaseClass) |
| ExternalSolverConfigData |
Gets or sets serialized configuration data for the external solver associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| ExternalSolverID |
Gets or sets the unique identifier of an external solver to be used for this unit operation.
(Inherited from UnitOpBaseClass) |
| ExtraProperties | (Inherited from BaseClass) |
| ExtraPropertiesDescriptions | (Inherited from BaseClass) |
| ExtraPropertiesTypes | (Inherited from BaseClass) |
| ExtraPropertiesUnitTypes | (Inherited from BaseClass) |
| FlowSheet |
Gets the current flowsheet where this object is located.
(Inherited from BaseClass) |
| GHGEmissionData | (Inherited from BaseClass) |
| GraphicObject |
Gets or sets the graphic object representation of this object in the flowsheet.
(Inherited from BaseClass) |
| HasPropertiesForDynamicMode | Gets a value indicating whether this unit operation exposes properties for dynamic mode. (Overrides BaseClassHasPropertiesForDynamicMode) |
| HeatDuty | Gets or sets the heat duty (kW) as a plain Double proxy for DeltaQ. |
| Height | (Inherited from BaseClass) |
| InfoCarrierVarType | (Inherited from BaseClass) |
| IsAdjustAttached |
Checks if an Adjust operation is attached to this object.
(Inherited from BaseClass) |
| IsDirty | (Inherited from BaseClass) |
| IsFunctional | (Inherited from BaseClass) |
| IsInfoCarrierAttached | (Inherited from BaseClass) |
| IsSink | (Inherited from BaseClass) |
| IsSource | (Inherited from BaseClass) |
| IsSpecAttached |
Checks if an Specification operation is attached to this object.
(Inherited from BaseClass) |
| LastSolutionInputSnapshot | (Inherited from BaseClass) |
| LastUpdated | (Inherited from BaseClass) |
| Left | (Inherited from BaseClass) |
| MobileCompatible | Gets a value indicating whether this unit operation is compatible with the DWSIM mobile interface. (Overrides BaseClassMobileCompatible) |
| Name |
Object's Unique ID (Name)
(Inherited from BaseClass) |
| ObjectClass | Gets or sets the simulation object class category (Exchangers). (Overrides BaseClassObjectClass) |
| OutletTemperature | Gets or sets the target outlet temperature (K) used when CalcMode is OutletTemperature. |
| OutletVaporFraction | Gets or sets the target outlet vapor mole fraction used when CalcMode is OutletVaporFraction. |
| OverrideCalculationRoutine | (Inherited from BaseClass) |
| ParticleSizeDistributions |
Gets or sets the dictionary of particle size distribution data, keyed by compound or stream name.
(Inherited from UnitOpBaseClass) |
| Phases |
Phase collection, only implemented for Material Streams.
(Inherited from BaseClass) |
| PreferredFlashAlgorithmTag | (Inherited from BaseClass) |
| PressureDrop | Gets or sets the pressure drop (Pa) as a plain Double proxy for DeltaP. |
| ProductAssembly | (Inherited from BaseClass) |
| ProductAuthor | (Inherited from BaseClass) |
| ProductContactInfo | (Inherited from BaseClass) |
| ProductDescription | (Inherited from BaseClass) |
| ProductName | (Inherited from BaseClass) |
| ProductPage | (Inherited from BaseClass) |
| ProductVersion | (Inherited from BaseClass) |
| PropertyPackage |
Gets or sets the property package associated with this object.
(Inherited from UnitOpBaseClass) |
| Right | (Inherited from BaseClass) |
| SelectedEquipmentType |
Gets or sets the name of the equipment type currently selected for this unit operation.
(Inherited from UnitOpBaseClass) |
| SpecVarType |
If an Specification object is attached to this object, returns a variable describing how this object is used by it (target or source).
(Inherited from BaseClass) |
| StoreDetailedDebugReport | (Inherited from BaseClass) |
| SupportsDynamicMode | Gets a value indicating whether this unit operation supports dynamic simulation mode. (Overrides BaseClassSupportsDynamicMode) |
| SupportsParticleSizeDistributions |
Gets a value indicating whether this unit operation supports particle size distribution calculations.
(Inherited from UnitOpBaseClass) |
| SupportsRestoreStateAfterError |
Gets a value indicating whether this unit operation supports restoring its state after a solver error.
(Inherited from UnitOpBaseClass) |
| TemperatureChange | Gets or sets the temperature change (K) as a plain Double proxy for DeltaT. |
| Top | (Inherited from BaseClass) |
| UserDefinedChartNames | (Inherited from BaseClass) |
| Visible | (Inherited from BaseClass) |
| Width | (Inherited from BaseClass) |
Methods
| AddDynamicProperty | (Inherited from BaseClass) |
| AddExtraProperty | (Inherited from BaseClass) |
| AppendDebugLine | (Inherited from BaseClass) |
| Calculate |
Performs the steady-state cooler calculation according to CalcMode.
Computes outlet enthalpy, temperature, vapor fraction, and heat removal duty from the inlet stream and specified parameters.
(Overrides BaseClassCalculate(Object)) |
| CheckDirtyStatus |
Checks whether the unit operation's input data has changed since the last successful solve,
and updates the dirty flag accordingly.
(Inherited from UnitOpBaseClass) |
| CheckSpec |
Checks if a value is valid.
(Inherited from BaseClass) |
| ClearExtraProperties | (Inherited from BaseClass) |
| ClearPropertyPackageInstance |
Removes the externally set property package instance from this unit operation,
reverting to the flowsheet-level property package lookup.
(Inherited from UnitOpBaseClass) |
| Clone |
Clones the current object, returning a new one with identical properties.
(Inherited from BaseClass) |
| CloneJSON | Creates a deep copy of this cooler via JSON serialization. (Overrides BaseClassCloneJSON) |
| CloneXML | Creates a deep copy of this cooler via XML serialization. (Overrides BaseClassCloneXML) |
| CloseDynamicsEditForm | (Inherited from BaseClass) |
| CloseEditForm | Closes and disposes the editing form for this cooler if it is open. (Overrides BaseClassCloseEditForm) |
| ConnectEnergyStream | (Inherited from BaseClass) |
| ConnectFeedEnergyStream | (Inherited from BaseClass) |
| ConnectFeedMaterialStream | (Inherited from BaseClass) |
| ConnectProductEnergyStream | (Inherited from BaseClass) |
| ConnectProductMaterialStream | (Inherited from BaseClass) |
| CopyDataToClipboard |
Copies the object properties to the Clipboard.
(Inherited from BaseClass) |
| CreateDimensionsList | Creates the dimensions list used for equipment sizing (Area). (Overrides UnitOpBaseClassCreateDimensionsList) |
| CreateDynamicProperties | Registers dynamic properties (Flow Conductance, Volume, Minimum Pressure, initialization flags) used in dynamic simulation mode. (Overrides BaseClassCreateDynamicProperties) |
| CreateNew | (Inherited from BaseClass) |
| DeCalculate | Resets the outlet material and energy streams to an uncalculated state. (Overrides UnitOpBaseClassDeCalculate) |
| DeCalculate(Object) | (Inherited from BaseClass) |
| DisplayDynamicsEditForm | (Inherited from BaseClass) |
| DisplayEditForm | Opens or activates the editing form for this cooler. (Overrides BaseClassDisplayEditForm) |
| DisplayExtraPropertiesEditForm | (Inherited from BaseClass) |
| Dispose | (Inherited from BaseClass) |
| Dispose(Boolean) | (Inherited from BaseClass) |
| FT |
Formats a property string, adding its units in parenthesis.
(Inherited from BaseClass) |
| GetAsObject | (Inherited from BaseClass) |
| GetBytesFromResource | (Inherited from BaseClass) |
| GetCalculationModes | Returns the list of available calculation mode names and IDs. (Overrides UnitOpBaseClassGetCalculationModes) |
| GetChartModel | (Inherited from BaseClass) |
| GetChartModelNames | (Inherited from BaseClass) |
| GetConnectionPortsInfo | (Inherited from BaseClass) |
| GetConnectionPortsList | (Inherited from BaseClass) |
| GetDebugReport |
Runs the unit operation in debug mode and returns a formatted text report
containing intermediate calculation steps and any error information.
(Inherited from UnitOpBaseClass) |
| GetDebugWriter | (Inherited from BaseClass) |
| GetDefaultProperties | (Inherited from BaseClass) |
| GetDisplayDescription | Returns the localized display description for the cooler type. (Overrides BaseClassGetDisplayDescription) |
| GetDisplayName | Returns the localized display name for the cooler type. (Overrides BaseClassGetDisplayName) |
| GetDynamicContents |
Returns the current mass held in the accumulation stream of this unit operation.
(Inherited from UnitOpBaseClass) |
| GetDynamicProperty | (Inherited from BaseClass) |
| GetDynamicPropertyUnitType | (Inherited from BaseClass) |
| GetDynamicResidenceTime |
Returns the dynamic residence time of this unit operation, computed as volume divided
by the total volumetric inlet flow rate.
(Inherited from UnitOpBaseClass) |
| GetDynamicVolume |
Returns the dynamic volume of this unit operation from its dynamic property store.
(Inherited from UnitOpBaseClass) |
| GetEditingForm | (Inherited from BaseClass) |
| GetEnergyBalanceResidual | (Inherited from BaseClass) |
| GetEnergyConsumption |
Returns the total energy consumed by this unit operation by summing the energy flows
from all connected energy streams and the energy connector.
(Inherited from UnitOpBaseClass) |
| GetExtraPropertyValue | (Inherited from BaseClass) |
| GetFlowsheet | (Inherited from BaseClass) |
| GetIconBitmap | Returns the icon bitmap resource for the cooler. (Overrides BaseClassGetIconBitmap) |
| GetIconBitmapBytes | Returns the raw bytes of the cooler icon image resource. (Overrides BaseClassGetIconBitmapBytes) |
| GetKeyPropertyNames |
Returns the names of the key output properties reported by this unit operation.
(Inherited from UnitOpBaseClass) |
| GetKeyPropertyUnits |
Returns the display unit string for a named key property.
(Inherited from UnitOpBaseClass) |
| GetKeyPropertyValue |
Returns the current numeric value of a named key property in SI units.
(Inherited from UnitOpBaseClass) |
| GetMassBalanceResidual | (Inherited from BaseClass) |
| GetPowerGeneratedOrConsumed | (Inherited from BaseClass) |
| GetPreferredGraphicObjectHeight | (Inherited from BaseClass) |
| GetPreferredGraphicObjectWidth | (Inherited from BaseClass) |
| GetProperties | Returns the list of property identifiers available for this cooler. (Overrides BaseClassGetProperties(PropertyType)) |
| GetProperties2 | (Inherited from BaseClass) |
| GetPropertyDescription | Returns a human-readable description for the specified property name, used in the property grid. (Overrides BaseClassGetPropertyDescription(String)) |
| GetPropertyUnit | Returns the unit string for the specified property. (Overrides BaseClassGetPropertyUnit(String, IUnitsOfMeasure)) |
| GetPropertyUnits2 | (Inherited from BaseClass) |
| GetPropertyValue | Returns the value of the specified property converted to the given unit system. (Overrides UnitOpBaseClassGetPropertyValue(String, IUnitsOfMeasure)) |
| GetPropertyValue2 | (Inherited from BaseClass) |
| GetReport | Generates a text report summarizing the cooler's inlet, outlet, and calculation parameters. (Overrides BaseClassGetReport(IUnitsOfMeasure, CultureInfo, String)) |
| GetStructuredReport | Generates a structured (tabular) results report for display in the UI. (Overrides BaseClassGetStructuredReport) |
| GetVersion | (Inherited from BaseClass) |
| IsDynamicProperty | (Inherited from BaseClass) |
| LoadData |
Restores the unit operation state from a list of XML elements previously produced by SaveData.
(Inherited from UnitOpBaseClass) |
| ObjectCopy | (Inherited from BaseClass) |
| PerformPostCalcValidation | (Inherited from BaseClass) |
| RemoveDynamicProperty | (Inherited from BaseClass) |
| RemoveExtraProperty | (Inherited from BaseClass) |
| RunDynamicModel | Executes the cooler dynamic model for one integration time step, updating accumulation, temperature, and pressure. (Overrides BaseClassRunDynamicModel) |
| SaveData |
Serializes the unit operation state to a list of XML elements for persistence.
(Inherited from UnitOpBaseClass) |
| SetCalculationMode | Sets the calculation mode by numeric ID and returns the mode name. (Overrides UnitOpBaseClassSetCalculationMode(Int32)) |
| SetCanUsePreviousResults | (Inherited from BaseClass) |
| SetDirtyStatus | (Inherited from BaseClass) |
| SetDynamicProperty | (Inherited from BaseClass) |
| SetExtraPropertyValue | (Inherited from BaseClass) |
| SetFlowsheet |
Sets the Flowsheet to which this object belongs to.
(Inherited from BaseClass) |
| SetKeyPropertyValue |
Sets the value of a named key property, converting from the supplied units to SI internally.
(Inherited from UnitOpBaseClass) |
| SetPropertyPackageInstance |
Assigns an externally supplied property package instance to this unit operation,
bypassing the flowsheet-level property package lookup.
(Inherited from UnitOpBaseClass) |
| SetPropertyValue | Sets the value of the specified property from the given unit system. (Overrides BaseClassSetPropertyValue(String, Object, IUnitsOfMeasure)) |
| SetPropertyValue2 | (Inherited from BaseClass) |
| Solve |
Solves the unit operation, optionally saving and restoring state on error
when the flowsheet option RestoreUnitOperationStateAfterError is enabled.
(Inherited from UnitOpBaseClass) |
| StoreDebugReport | (Inherited from BaseClass) |
| ToString | (Inherited from BaseClass) |
| TransferAdditionalSolidData | (Inherited from BaseClass) |
| Unsolve |
Decalculates the object.
(Inherited from UnitOpBaseClass) |
| UpdateDimensionsList | Updates the dimensions list (no-op for the cooler). (Overrides UnitOpBaseClassUpdateDimensionsList) |
| UpdateDynamicsEditForm | (Inherited from BaseClass) |
| UpdateEditForm | Refreshes the displayed data in the editing form if it is currently open. (Overrides BaseClassUpdateEditForm) |
| UpdateExtraPropertiesEditForm | (Inherited from BaseClass) |
| Validate |
Validates the object, checking its connections and other parameters.
(Inherited from BaseClass) |
Fields
| _CanUsePreviousResults | (Inherited from BaseClass) |
| _capeopenmode | (Inherited from UnitOpBaseClass) |
| _IsDirty | (Inherited from BaseClass) |
| _pp | (Inherited from UnitOpBaseClass) |
| _ppid | (Inherited from UnitOpBaseClass) |
| AccumulationStream | (Inherited from UnitOpBaseClass) |
| CalculationRoutineOverride | (Inherited from BaseClass) |
| currentM | |
| disposedValue | (Inherited from BaseClass) |
| ExtraPropertiesEditor | (Inherited from BaseClass) |
| f | |
| fd | (Inherited from BaseClass) |
| LaunchExternalPropertyEditor | (Inherited from BaseClass) |
| m_cmode | |
| m_dp | |
| m_DQ | |
| m_dt | |
| m_eta | |
| m_flowsheet | (Inherited from BaseClass) |
| m_Tout | |
| m_VFout | |
| prevM |
Extension Methods
| GetEnergyStream | (Defined by StreamListExtender) |
| GetEnumNames | (Defined by General) |
| GetInletEnergyStream | (Defined by StreamListExtender) |
| GetInletMaterialStream | (Defined by StreamListExtender) |
| GetOutletEnergyStream | (Defined by StreamListExtender) |
| GetOutletMaterialStream | (Defined by StreamListExtender) |
| IsValidDouble | (Defined by General) |