Mixer Class
Represents a mixer unit operation that combines up to six material inlet streams into one outlet
stream by performing mass and energy balances. Outlet pressure is determined by the configured
MixerPressureBehavior (minimum, maximum, or average of inlet pressures).
Definition
Namespace: DWSIM.UnitOperations.UnitOperations
Assembly: DWSIM.UnitOperations (in DWSIM.UnitOperations.dll) Version: 10.0.0.0
Assembly: DWSIM.UnitOperations (in DWSIM.UnitOperations.dll) Version: 10.0.0.0
C#
[SerializableAttribute]
public class Mixer : UnitOpBaseClassVB
<SerializableAttribute>
Public Class Mixer
Inherits UnitOpBaseClass- Inheritance
- Object BaseClass UnitOpBaseClass Mixer
Constructors
| Mixer | Initializes a new default instance of the Mixer class. |
| Mixer(String, String) | Initializes a new instance of the Mixer class with a name and description. |
Properties
| AdjustVarType |
If an Adjust object is attached to this object, returns a variable describing how this object is used by it (manipulated, controlled or reference).
(Inherited from BaseClass) |
| Annotation | (Inherited from BaseClass) |
| AttachedAdjustId |
If an Adjust object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedInfoCarrierId | (Inherited from BaseClass) |
| AttachedSpecId |
If an Specification object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedUtilities | (Inherited from BaseClass) |
| Bottom | (Inherited from BaseClass) |
| Calculated | (Inherited from BaseClass) |
| CanUsePreviousResults | (Inherited from BaseClass) |
| ComponentDescription |
Gets or sets the CAPE-OPEN component description for this unit operation.
(Inherited from UnitOpBaseClass) |
| ComponentName |
Gets or sets the CAPE-OPEN component name for this unit operation.
(Inherited from UnitOpBaseClass) |
| CreateChartAction | (Inherited from BaseClass) |
| DebugMode | (Inherited from BaseClass) |
| DebugText | (Inherited from BaseClass) |
| DetailedDebugReport | (Inherited from BaseClass) |
| Dimensions |
Gets or sets the list of physical dimensions (e.g. vessel diameter, length) associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| DynamicsOnly | (Inherited from BaseClass) |
| DynamicsSpec | (Inherited from BaseClass) |
| EnergyFlow |
Energy Flow property. Only implemented for Energy Streams.
(Inherited from BaseClass) |
| EquipmentTypes |
Gets the list of available equipment type names supported by this unit operation.
(Inherited from UnitOpBaseClass) |
| ErrorMessage |
Gets or sets the error message regarding the last calculation attempt.
(Inherited from BaseClass) |
| ExternalSolverConfigData |
Gets or sets serialized configuration data for the external solver associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| ExternalSolverID |
Gets or sets the unique identifier of an external solver to be used for this unit operation.
(Inherited from UnitOpBaseClass) |
| ExtraProperties | (Inherited from BaseClass) |
| ExtraPropertiesDescriptions | (Inherited from BaseClass) |
| ExtraPropertiesTypes | (Inherited from BaseClass) |
| ExtraPropertiesUnitTypes | (Inherited from BaseClass) |
| FlowSheet |
Gets the current flowsheet where this object is located.
(Inherited from BaseClass) |
| GHGEmissionData | (Inherited from BaseClass) |
| GraphicObject |
Gets or sets the graphic object representation of this object in the flowsheet.
(Inherited from BaseClass) |
| HasPropertiesForDynamicMode | Gets a value indicating whether this unit operation exposes properties for dynamic mode. (Overrides BaseClassHasPropertiesForDynamicMode) |
| Height | (Inherited from BaseClass) |
| InfoCarrierVarType | (Inherited from BaseClass) |
| IsAdjustAttached |
Checks if an Adjust operation is attached to this object.
(Inherited from BaseClass) |
| IsDirty | (Inherited from BaseClass) |
| IsFunctional | (Inherited from BaseClass) |
| IsInfoCarrierAttached | (Inherited from BaseClass) |
| IsSink | (Inherited from BaseClass) |
| IsSource | (Inherited from BaseClass) |
| IsSpecAttached |
Checks if an Specification operation is attached to this object.
(Inherited from BaseClass) |
| LastSolutionInputSnapshot | (Inherited from BaseClass) |
| LastUpdated | (Inherited from BaseClass) |
| Left | (Inherited from BaseClass) |
| MobileCompatible | Gets a value indicating whether this unit operation is compatible with the DWSIM mobile interface. (Overrides BaseClassMobileCompatible) |
| Name |
Object's Unique ID (Name)
(Inherited from BaseClass) |
| ObjectClass | Gets or sets the simulation object class category (MixersSplitters). (Overrides BaseClassObjectClass) |
| OverrideCalculationRoutine | (Inherited from BaseClass) |
| ParticleSizeDistributions |
Gets or sets the dictionary of particle size distribution data, keyed by compound or stream name.
(Inherited from UnitOpBaseClass) |
| Phases |
Phase collection, only implemented for Material Streams.
(Inherited from BaseClass) |
| PreferredFlashAlgorithmTag | (Inherited from BaseClass) |
| PressureCalculation | Gets or sets the rule used to determine the outlet stream pressure from the inlet stream pressures. |
| ProductAssembly | (Inherited from BaseClass) |
| ProductAuthor | (Inherited from BaseClass) |
| ProductContactInfo | (Inherited from BaseClass) |
| ProductDescription | (Inherited from BaseClass) |
| ProductName | (Inherited from BaseClass) |
| ProductPage | (Inherited from BaseClass) |
| ProductVersion | (Inherited from BaseClass) |
| PropertyPackage |
Gets or sets the property package associated with this object.
(Inherited from UnitOpBaseClass) |
| Right | (Inherited from BaseClass) |
| SelectedEquipmentType |
Gets or sets the name of the equipment type currently selected for this unit operation.
(Inherited from UnitOpBaseClass) |
| SpecVarType |
If an Specification object is attached to this object, returns a variable describing how this object is used by it (target or source).
(Inherited from BaseClass) |
| StoreDetailedDebugReport | (Inherited from BaseClass) |
| SupportsDynamicMode | Gets a value indicating whether this unit operation supports dynamic simulation mode. (Overrides BaseClassSupportsDynamicMode) |
| SupportsParticleSizeDistributions |
Gets a value indicating whether this unit operation supports particle size distribution calculations.
(Inherited from UnitOpBaseClass) |
| SupportsRestoreStateAfterError |
Gets a value indicating whether this unit operation supports restoring its state after a solver error.
(Inherited from UnitOpBaseClass) |
| Top | (Inherited from BaseClass) |
| UserDefinedChartNames | (Inherited from BaseClass) |
| Visible | (Inherited from BaseClass) |
| Width | (Inherited from BaseClass) |
Methods
| AddDynamicProperty | (Inherited from BaseClass) |
| AddExtraProperty | (Inherited from BaseClass) |
| AppendDebugLine | (Inherited from BaseClass) |
| Calculate |
Performs the mixer mass and energy balance: combines all connected inlet streams into the
single outlet stream using the selected pressure rule and a PH flash to determine outlet temperature.
(Overrides BaseClassCalculate(Object)) |
| CheckDirtyStatus |
Checks whether the unit operation's input data has changed since the last successful solve,
and updates the dirty flag accordingly.
(Inherited from UnitOpBaseClass) |
| CheckSpec |
Checks if a value is valid.
(Inherited from BaseClass) |
| ClearExtraProperties | (Inherited from BaseClass) |
| ClearPropertyPackageInstance |
Removes the externally set property package instance from this unit operation,
reverting to the flowsheet-level property package lookup.
(Inherited from UnitOpBaseClass) |
| Clone |
Clones the current object, returning a new one with identical properties.
(Inherited from BaseClass) |
| CloneJSON | Creates a deep copy of this mixer via JSON serialization. (Overrides BaseClassCloneJSON) |
| CloneXML | Creates a deep copy of this mixer via XML serialization. (Overrides BaseClassCloneXML) |
| CloseDynamicsEditForm | (Inherited from BaseClass) |
| CloseEditForm | Closes and disposes the editing form for this mixer if it is open. (Overrides BaseClassCloseEditForm) |
| ConnectEnergyStream | (Inherited from BaseClass) |
| ConnectFeedEnergyStream | (Inherited from BaseClass) |
| ConnectFeedMaterialStream | (Inherited from BaseClass) |
| ConnectProductEnergyStream | (Inherited from BaseClass) |
| ConnectProductMaterialStream | (Inherited from BaseClass) |
| CopyDataToClipboard |
Copies the object properties to the Clipboard.
(Inherited from BaseClass) |
| CreateDimensionsList |
Initializes the list of equipment dimensions for this unit operation.
Override to populate the Dimensions collection with dimension entries.
(Inherited from UnitOpBaseClass) |
| CreateDynamicProperties | (Inherited from BaseClass) |
| CreateNew | (Inherited from BaseClass) |
| DeCalculate | Resets the outlet material stream to an uncalculated state. (Overrides UnitOpBaseClassDeCalculate) |
| DeCalculate(Object) | (Inherited from BaseClass) |
| DisplayDynamicsEditForm | (Inherited from BaseClass) |
| DisplayEditForm | Opens or activates the editing form for this mixer. (Overrides BaseClassDisplayEditForm) |
| DisplayExtraPropertiesEditForm | (Inherited from BaseClass) |
| Dispose | (Inherited from BaseClass) |
| Dispose(Boolean) | (Inherited from BaseClass) |
| FT |
Formats a property string, adding its units in parenthesis.
(Inherited from BaseClass) |
| GetAsObject | (Inherited from BaseClass) |
| GetBytesFromResource | (Inherited from BaseClass) |
| GetCalculationModes |
Returns the list of available calculation mode names for this unit operation.
(Inherited from UnitOpBaseClass) |
| GetChartModel | (Inherited from BaseClass) |
| GetChartModelNames | (Inherited from BaseClass) |
| GetConnectionPortsInfo | (Inherited from BaseClass) |
| GetConnectionPortsList | (Inherited from BaseClass) |
| GetDebugReport |
Runs the unit operation in debug mode and returns a formatted text report
containing intermediate calculation steps and any error information.
(Inherited from UnitOpBaseClass) |
| GetDebugWriter | (Inherited from BaseClass) |
| GetDefaultProperties | (Inherited from BaseClass) |
| GetDisplayDescription | Returns the localized display description for the mixer type. (Overrides BaseClassGetDisplayDescription) |
| GetDisplayName | Returns the localized display name for the mixer type. (Overrides BaseClassGetDisplayName) |
| GetDynamicContents |
Returns the current mass held in the accumulation stream of this unit operation.
(Inherited from UnitOpBaseClass) |
| GetDynamicProperty | (Inherited from BaseClass) |
| GetDynamicPropertyUnitType | (Inherited from BaseClass) |
| GetDynamicResidenceTime |
Returns the dynamic residence time of this unit operation, computed as volume divided
by the total volumetric inlet flow rate.
(Inherited from UnitOpBaseClass) |
| GetDynamicVolume |
Returns the dynamic volume of this unit operation from its dynamic property store.
(Inherited from UnitOpBaseClass) |
| GetEditingForm | (Inherited from BaseClass) |
| GetEnergyBalanceResidual | (Inherited from BaseClass) |
| GetEnergyConsumption |
Returns the total energy consumed by this unit operation by summing the energy flows
from all connected energy streams and the energy connector.
(Inherited from UnitOpBaseClass) |
| GetExtraPropertyValue | (Inherited from BaseClass) |
| GetFlowsheet | (Inherited from BaseClass) |
| GetIconBitmap | Returns the icon bitmap resource for the mixer. (Overrides BaseClassGetIconBitmap) |
| GetIconBitmapBytes | Returns the raw bytes of the mixer icon image resource. (Overrides BaseClassGetIconBitmapBytes) |
| GetKeyPropertyNames |
Returns the names of the key output properties reported by this unit operation.
(Inherited from UnitOpBaseClass) |
| GetKeyPropertyUnits |
Returns the display unit string for a named key property.
(Inherited from UnitOpBaseClass) |
| GetKeyPropertyValue |
Returns the current numeric value of a named key property in SI units.
(Inherited from UnitOpBaseClass) |
| GetMassBalanceResidual | (Inherited from BaseClass) |
| GetPowerGeneratedOrConsumed | (Inherited from BaseClass) |
| GetPreferredGraphicObjectHeight | (Inherited from BaseClass) |
| GetPreferredGraphicObjectWidth | (Inherited from BaseClass) |
| GetProperties | Returns the list of property identifiers available for this mixer. (Overrides BaseClassGetProperties(PropertyType)) |
| GetProperties2 | (Inherited from BaseClass) |
| GetPropertyDescription | (Inherited from BaseClass) |
| GetPropertyUnit | Returns the unit string for the specified property. (Overrides BaseClassGetPropertyUnit(String, IUnitsOfMeasure)) |
| GetPropertyUnits2 | (Inherited from BaseClass) |
| GetPropertyValue | Returns the value of the specified property. (Overrides UnitOpBaseClassGetPropertyValue(String, IUnitsOfMeasure)) |
| GetPropertyValue2 | (Inherited from BaseClass) |
| GetReport | (Inherited from BaseClass) |
| GetStructuredReport | (Inherited from BaseClass) |
| GetVersion | (Inherited from BaseClass) |
| IsDynamicProperty | (Inherited from BaseClass) |
| LoadData |
Restores the unit operation state from a list of XML elements previously produced by SaveData.
(Inherited from UnitOpBaseClass) |
| ObjectCopy | (Inherited from BaseClass) |
| PerformPostCalcValidation | (Inherited from BaseClass) |
| RemoveDynamicProperty | (Inherited from BaseClass) |
| RemoveExtraProperty | (Inherited from BaseClass) |
| RunDynamicModel | Executes the mixer calculation in dynamic simulation mode. (Overrides BaseClassRunDynamicModel) |
| SaveData |
Serializes the unit operation state to a list of XML elements for persistence.
(Inherited from UnitOpBaseClass) |
| SetCalculationMode |
Sets the active calculation mode for this unit operation by numeric identifier.
(Inherited from UnitOpBaseClass) |
| SetCanUsePreviousResults | (Inherited from BaseClass) |
| SetDirtyStatus | (Inherited from BaseClass) |
| SetDynamicProperty | (Inherited from BaseClass) |
| SetExtraPropertyValue | (Inherited from BaseClass) |
| SetFlowsheet |
Sets the Flowsheet to which this object belongs to.
(Inherited from BaseClass) |
| SetKeyPropertyValue |
Sets the value of a named key property, converting from the supplied units to SI internally.
(Inherited from UnitOpBaseClass) |
| SetPropertyPackageInstance |
Assigns an externally supplied property package instance to this unit operation,
bypassing the flowsheet-level property package lookup.
(Inherited from UnitOpBaseClass) |
| SetPropertyValue | Sets the value of the specified property; delegates to the base implementation. (Overrides BaseClassSetPropertyValue(String, Object, IUnitsOfMeasure)) |
| SetPropertyValue2 | (Inherited from BaseClass) |
| Solve |
Solves the unit operation, optionally saving and restoring state on error
when the flowsheet option RestoreUnitOperationStateAfterError is enabled.
(Inherited from UnitOpBaseClass) |
| StoreDebugReport | (Inherited from BaseClass) |
| ToString | (Inherited from BaseClass) |
| TransferAdditionalSolidData | (Inherited from BaseClass) |
| Unsolve |
Decalculates the object.
(Inherited from UnitOpBaseClass) |
| UpdateDimensionsList |
Updates the equipment dimensions list after a successful calculation.
Override to refresh computed dimension values.
(Inherited from UnitOpBaseClass) |
| UpdateDynamicsEditForm | (Inherited from BaseClass) |
| UpdateEditForm | Refreshes the displayed data in the editing form if it is currently open. (Overrides BaseClassUpdateEditForm) |
| UpdateExtraPropertiesEditForm | (Inherited from BaseClass) |
| Validate |
Validates the object, checking its connections and other parameters.
(Inherited from BaseClass) |
Fields
| _CanUsePreviousResults | (Inherited from BaseClass) |
| _capeopenmode | (Inherited from UnitOpBaseClass) |
| _IsDirty | (Inherited from BaseClass) |
| _pp | (Inherited from UnitOpBaseClass) |
| _ppid | (Inherited from UnitOpBaseClass) |
| AccumulationStream | (Inherited from UnitOpBaseClass) |
| CalculationRoutineOverride | (Inherited from BaseClass) |
| disposedValue | (Inherited from BaseClass) |
| ExtraPropertiesEditor | (Inherited from BaseClass) |
| f | |
| fd | (Inherited from BaseClass) |
| LaunchExternalPropertyEditor | (Inherited from BaseClass) |
| m_flowsheet | (Inherited from BaseClass) |
| m_pressurebehavior |
Extension Methods
| GetEnergyStream | (Defined by StreamListExtender) |
| GetEnumNames | (Defined by General) |
| GetInletEnergyStream | (Defined by StreamListExtender) |
| GetInletMaterialStream | (Defined by StreamListExtender) |
| GetOutletEnergyStream | (Defined by StreamListExtender) |
| GetOutletMaterialStream | (Defined by StreamListExtender) |
| IsValidDouble | (Defined by General) |