Compressor Properties
Properties
| AdiabaticCoefficient | Gets or sets the calculated adiabatic head coefficient. |
| AdiabaticEfficiency | Gets or sets the adiabatic (isentropic) efficiency (%). |
| AdiabaticHead | Gets or sets the calculated adiabatic head (J/kg). |
| AdjustVarType |
If an Adjust object is attached to this object, returns a variable describing how this object is used by it (manipulated, controlled or reference).
(Inherited from BaseClass) |
| Annotation | (Inherited from BaseClass) |
| AttachedAdjustId |
If an Adjust object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedInfoCarrierId | (Inherited from BaseClass) |
| AttachedSpecId |
If an Specification object is attached to this object, returns its ID.
(Inherited from BaseClass) |
| AttachedUtilities | (Inherited from BaseClass) |
| Bottom | (Inherited from BaseClass) |
| CalcMode | Gets or sets the active calculation mode. |
| Calculated | (Inherited from BaseClass) |
| CanUsePreviousResults | (Inherited from BaseClass) |
| ComponentDescription |
Gets or sets the CAPE-OPEN component description for this unit operation.
(Inherited from UnitOpBaseClass) |
| ComponentName |
Gets or sets the CAPE-OPEN component name for this unit operation.
(Inherited from UnitOpBaseClass) |
| CreateChartAction | (Inherited from BaseClass) |
| CurveEff | Gets or sets the efficiency read from the performance curve (%). |
| CurveFlow | Gets or sets the volumetric flow rate read from the performance curve (m³/s). |
| CurveHead | Gets or sets the head read from the performance curve (m). |
| CurvePower | Gets or sets the power read from the performance curve (kW). |
| Curves | Gets or sets the dictionary of performance curves keyed by rotation speed (RPM). |
| CurvesDB | Gets or sets the serialized performance curves database string. |
| DebugMode | (Inherited from BaseClass) |
| DebugText | (Inherited from BaseClass) |
| DeltaP | Gets or sets the pressure increase across the compressor (Pa). |
| DeltaQ | Gets or sets the shaft power required (kW). |
| DeltaT | Gets or sets the calculated temperature change across the compressor (K). |
| DetailedDebugReport | (Inherited from BaseClass) |
| Dimensions |
Gets or sets the list of physical dimensions (e.g. vessel diameter, length) associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| DynamicsOnly | (Inherited from BaseClass) |
| DynamicsSpec | (Inherited from BaseClass) |
| EnergyFlow |
Energy Flow property. Only implemented for Energy Streams.
(Inherited from BaseClass) |
| EquipmentTypes | Gets the list of equipment sub-types available for this compressor. (Overrides UnitOpBaseClassEquipmentTypes) |
| EquipType | Gets or sets the equipment sub-type identifier string. |
| ErrorMessage |
Gets or sets the error message regarding the last calculation attempt.
(Inherited from BaseClass) |
| ExternalSolverConfigData |
Gets or sets serialized configuration data for the external solver associated with this unit operation.
(Inherited from UnitOpBaseClass) |
| ExternalSolverID |
Gets or sets the unique identifier of an external solver to be used for this unit operation.
(Inherited from UnitOpBaseClass) |
| ExtraProperties | (Inherited from BaseClass) |
| ExtraPropertiesDescriptions | (Inherited from BaseClass) |
| ExtraPropertiesTypes | (Inherited from BaseClass) |
| ExtraPropertiesUnitTypes | (Inherited from BaseClass) |
| FlowSheet |
Gets the current flowsheet where this object is located.
(Inherited from BaseClass) |
| GHGEmissionData | (Inherited from BaseClass) |
| GraphicObject |
Gets or sets the graphic object representation of this object in the flowsheet.
(Inherited from BaseClass) |
| HasPropertiesForDynamicMode | Gets a value indicating whether this unit operation exposes properties for dynamic mode. (Overrides BaseClassHasPropertiesForDynamicMode) |
| HeatDuty | Gets or sets the shaft power (kW) as a proxy for DeltaQ. |
| Height | (Inherited from BaseClass) |
| IgnorePhase | Gets or sets whether the phase check is bypassed during calculation. |
| InfoCarrierVarType | (Inherited from BaseClass) |
| IsAdjustAttached |
Checks if an Adjust operation is attached to this object.
(Inherited from BaseClass) |
| IsDirty | (Inherited from BaseClass) |
| IsFunctional | (Inherited from BaseClass) |
| IsInfoCarrierAttached | (Inherited from BaseClass) |
| IsSink | (Inherited from BaseClass) |
| IsSource | (Inherited from BaseClass) |
| IsSpecAttached |
Checks if an Specification operation is attached to this object.
(Inherited from BaseClass) |
| LastSolutionInputSnapshot | (Inherited from BaseClass) |
| LastUpdated | (Inherited from BaseClass) |
| Left | (Inherited from BaseClass) |
| MobileCompatible | Gets a value indicating whether this unit operation is compatible with the DWSIM mobile interface. (Overrides BaseClassMobileCompatible) |
| Name |
Object's Unique ID (Name)
(Inherited from BaseClass) |
| ObjectClass | Gets or sets the simulation object class category (PressureChangers). (Overrides BaseClassObjectClass) |
| OutletTemperature | Gets or sets the calculated outlet temperature (K). |
| OverrideCalculationRoutine | (Inherited from BaseClass) |
| ParticleSizeDistributions |
Gets or sets the dictionary of particle size distribution data, keyed by compound or stream name.
(Inherited from UnitOpBaseClass) |
| Phases |
Phase collection, only implemented for Material Streams.
(Inherited from BaseClass) |
| PolytropicCoefficient | Gets or sets the calculated polytropic head coefficient. |
| PolytropicEfficiency | Gets or sets the polytropic efficiency (%). |
| PolytropicHead | Gets or sets the calculated polytropic head (J/kg). |
| POut | Gets or sets the specified outlet pressure (Pa). |
| PreferredFlashAlgorithmTag | (Inherited from BaseClass) |
| PressureIncrease | Gets or sets the pressure increase (Pa) as a proxy for DeltaP. |
| PressureRatio | Gets or sets the specified pressure ratio (outlet/inlet). |
| ProcessPath | Gets or sets the thermodynamic process path (adiabatic or polytropic). |
| ProductAssembly | (Inherited from BaseClass) |
| ProductAuthor | (Inherited from BaseClass) |
| ProductContactInfo | (Inherited from BaseClass) |
| ProductDescription | (Inherited from BaseClass) |
| ProductName | (Inherited from BaseClass) |
| ProductPage | (Inherited from BaseClass) |
| ProductVersion | (Inherited from BaseClass) |
| PropertyPackage |
Gets or sets the property package associated with this object.
(Inherited from UnitOpBaseClass) |
| Right | (Inherited from BaseClass) |
| SelectedEquipmentType |
Gets or sets the name of the equipment type currently selected for this unit operation.
(Inherited from UnitOpBaseClass) |
| SpecVarType |
If an Specification object is attached to this object, returns a variable describing how this object is used by it (target or source).
(Inherited from BaseClass) |
| Speed | Gets or sets the operating rotation speed (RPM) used for curve interpolation. |
| StoreDetailedDebugReport | (Inherited from BaseClass) |
| SupportsDynamicMode | Gets a value indicating whether this unit operation supports dynamic simulation mode. (Overrides BaseClassSupportsDynamicMode) |
| SupportsParticleSizeDistributions |
Gets a value indicating whether this unit operation supports particle size distribution calculations.
(Inherited from UnitOpBaseClass) |
| SupportsRestoreStateAfterError |
Gets a value indicating whether this unit operation supports restoring its state after a solver error.
(Inherited from UnitOpBaseClass) |
| TemperatureChange | Gets or sets the temperature change (K) as a proxy for DeltaT. |
| Top | (Inherited from BaseClass) |
| UserDefinedChartNames | (Inherited from BaseClass) |
| Visible | (Inherited from BaseClass) |
| Width | (Inherited from BaseClass) |