Downloads

Warning/Disclaimer

The data and information within DWSIM has been obtained from a wide variety of literature sources. While reasonable care has been exercised in the collection of data and testing of this software, the author and contributors of the DWSIM Project disclaims any warranty, expressed or implied, as to the accuracy or reliability of the data or calculations contained therein.

The results of calculations obtained from DWSIM yield approximate results, which will not always be suitable for every application. The software is designed for use by trained professional personnel and is not a substitute for sound professional judgment. It is the sole responsibility of the user to validate the data presented by DWSIM and to determine whether the results of this program are accurate and suitable for any specific purpose. No guarantee of accuracy or fitness for any purpose is expressed or implied.

The author and contributors strongly recommends that the data be checked against other sources and/or methods before use and application. DWSIM's author and its contributors shall not be held liable for any direct, indirect, consequential or incidental damages incurred through use of the data or calculations.

Support the Project

Previous donations have already been very helpful on supporting development of new features and bringing DWSIM to new platforms (Raspberry Pi, macOS, Android, iOS). As DWSIM becomes more mature, development efforts must go towards more complex, specific models and systems. As complexity increases, more effort (= time and money) is required.

By becoming a patron, you will support future development of DWSIM while getting access to exclusive support channels and features, including custom-made plug-ins/add-ins which won't be distributed to anyone else except you.

Become a Patron

DWSIM has a Patreon page where you can subscribe to donate a fixed, monthly amount and get exclusive rewards in return. The more you donate, the more rewards you'll get.

By becoming a patron, you will support future development of DWSIM while getting access to exclusive support channels and features, including mobile version unlock keys. You can also participate on development polls and drive the path for future features.

Tier 1 - Super Supporter Membership (9.90 USD/month)

• Direct e-mail support
• Early access to updates
• Remote Desktop support sessions
• Access to exclusive development polls
• DWSIM Classic + ChemSep for macOS and Linux

Tier 2 - Awesome Supporter Membership (29.90 USD/month)

• Exclusive Unit Operation Models
• Exclusive Property Packages
• Exclusive Plug-Ins/Add-Ins
• Live chat support
• Android/iOS full version unlock keys
• Direct e-mail support
• Early access to updates
• Remote Desktop support sessions
• Access to exclusive development polls
• DWSIM Classic + ChemSep for macOS and Linux

Release Timeline

2020-03-05T00:00:00Z

v3.3.6 (iOS)

2020-03-05T00:00:00Z

v3.3.6 (Android)

2020-02-21T00:00:00Z

v5.8 Update 10 (Win/Linux/macOS)

{"selectable":false,"timeChangeable":false,"showCurrentTime":true}

Downloads

Installers

• DWSIM Simulator Plus v5.8 Update 10 Build 7368 for 32/64-bit Windows 7/8/10 (release date: March 04, 2020)

This is a convenience installer containing DWSIM v5.8 Update 10 for 64-bit Windows plus all plugins and add-ins for Awesome Supporters. It also contains a portable Python 3.6.8 installation automatically referenced by DWSIM to run python scripts when using the Python.NET interpreter.

• • (Awesome Supporter exclusive download)
  • (readme/changelog)

• DWSIM Simulator v5.8 Update 10 for 32/64-bit Windows 7/8/10 (release date: February 21, 2020)
  • (free download)
  • (readme/changelog)

• DWSIM Simulator v5.8 Update 10 for 64-bit Linux (release date: February 21, 2020)
  • (free download)
  • (readme/changelog)

• DWSIM Simulator v5.8 Update 10 (Cross-Platform UI) for 64-bit macOS (release date: February 21, 2020)
  • (free download)
  • (readme/changelog)

• DWSIM Simulator v5.8 Update 3 (Classic UI) VirtualBox VDI Image (release date: October 24, 2019)
  • (All Patrons download)
  • (readme/changelog)

• DWSIM Simulator v5.7 Update 13 (Classic UI) for 64-bit macOS (release date: July 18, 2019)
  • This version doesn't run on macOS Catalina.
  • (All Patrons download)
  • (readme/changelog)

• DWSIM Simulator v3.3 for iPhone/iPad
  • (download from App Store)

• DWSIM Simulator v3.3 for Android
  • (download from Play Store)

Free Plugins/Add-ins for Windows/Linux/macOS

• ThermoC Bridge Library
• Advanced EOS Library

Paid Plugins/Add-ins for Windows/Linux/macOS

• Capital Cost Estimator

Awesome Supporter Exclusive Plugins/Add-ins

• Capital Cost Estimator Plug-In

• Advanced PR/SRK EOS Property Package
• PC-SAFT Property Package
• GERG-2008 Property Package

• Falling Film Evaporator Unit Operation
• Air Cooler Unit Operation

• Energy Stream Splitter Unit Operation
• Material Stream Switch Unit Operation
• Energy Stream Switch Unit Operation

• Object Explorer Plug-In
• Excel Report Generator Plug-In
• Live Chat Support Plug-In

• DWSIM for Android Full Version Unlock Key
• DWSIM for iOS Full Version Unlock Key
• DWSIM Simulator (Classic UI) + ChemSep VirtualBox VDI Image

Platform-specific Details

DWSIM for Windows

DWSIM is available for 32 and 64-bit Windows 7, 8 and 10 systems. Administrator privileges are not required for the installation of DWSIM itself, but do are for .NET Type Libraries Registration (to enable Automation) and installation of the supplementary software. Requires Microsoft .NET Framework 4.6.1.

DWSIM Classic UI on Windows

When running DWSIM on Windows you have the choice of two Graphical User Interfaces (GUIs): Classic and Cross-Platform, the latter also being known as 'New' UI. The Classic UI is the Windows Forms-based, fully-featured one.

DWSIM Cross-Platform UI on Windows

The Cross-Platform UI is WPF-based and may look better on High-DPI displays, although it doesn't have the same feature set as the Classic UI one.

CAPE-OPEN is much better supported on the Classic UI than on the Cross-Platform one and, because of that, it is the recommended interface when working with CAPE-OPEN software like ChemSep and COCO components.

Support for Free Download Users is available on the SourceForge Forums only. Direct emails asking for help/support will be ignored.

DWSIM Patrons support future development, have early access to updates and direct email support.

DWSIM for macOS

DWSIM Cross-Platform UI on macOS

DWSIM for macOS includes the Cross-Platform UI only and is distributed as a compressed ZIP file with an App Bundle. It doesn't require any additional software and is supported only on the latest macOS versions.

DWSIM Classic UI on macOS

A special App Bundle is available for Tier 3+ Patrons and allows them to run the Windows version of DWSIM (Classic UI) on macOS. It Includes the full version of the Capital Cost Estimator Plugin, the Advanced EOS Library, ChemSep, Octave, Python and other CAPE-OPEN software. With this version you can create, open and manipulate simulations containing ChemSep columns and other CAPE-OPEN Unit Operations and Property Packages on macOS:

For more details, check the Features by Platform page.

DWSIM for Linux

DWSIM is available for 64-bit (amd64) Debian-based Linux systems. DWSIM on Linux requires Mono Framework version 5.14 or newer to run. The Debian Installer Package takes care of the required dependencies.

DWSIM Classic UI on Linux

When running DWSIM on Linux you have the choice of two Graphical User Interfaces (GUIs): Classic and Cross-Platform, the latter also being known as 'New' UI. The Classic UI is the Windows Forms-based one, which when running on Linux may exhibit some bugs because it is not Linux-native.

DWSIM Cross-Platform UI on Linux

On the other hand, the Cross-Platform UI is based on the Eto library which, when running on Linux, displays a GTK2-based interface, which looks native and is much faster the the Classic one:

The Classic UI can be launched by typing dwsim-classic on the terminal, and the Cross-Platform one can be launched by typing dwsim.

DWSIM Classic VirtualBox VDI Image

Available only for Tier 3+ Patrons, a special VirtualBox VDI Disk Image contains a full installation of Ubuntu Mate 14.04 32-bit and allows you to run the Windows version of DWSIM (Classic UI) on any system through VirtualBox. It includes the full version of the Capital Cost Estimator Plugin, the Advanced EOS Library, ChemSep, Octave and other CAPE-OPEN software. With this version you can create, open and manipulate simulations containing ChemSep columns and other CAPE-OPEN Unit Operations and Property Packages on any VirtualBox-supported host operating system:

For more details, check the Features by Platform page.

DWSIM for iOS (iPhone/iPad)

DWSIM for iOS contains many of the features present in the Desktop version and enables you to run complex simulations on your iPad or iPhone device:

For more details, check the Features by Platform page.

DWSIM for Android

DWSIM for Android contains many of the features present in the Desktop version and enables you to run complex simulations on your mobile Android device:

For more details, check the Features by Platform page.

Source Code

View Source @ GitHub DWSIM source code is written in VB.NET and C#, which can be compiled with Visual Studio 2017 or newer on Windows, MonoDevelop on Linux and Visual Studio for Mac with Mono Framework v5.12+ on macOS.